| Company Infomation | ||||||||||||
|
![]() |
|
|
![]() |
![]() |
|
||||||||||||||||||||||||||||||
use:the pvc resin is used in the insulation material of pvc tube panel hard transparent sheet, foil disc pvc monofilament,below molding product, appliance isulation material
| Tape: | SG1 | SG2 | SG3 | SG4 | SG5 | SG6 | SG7 | SG8 |
| K value | 77-75 | 74-73 | 72-71 | 70-69 | 68-66 | 65-63 | 62-60 | 59-55 |
| Viscosity, ml/g | 156-144 | 143-136 | 135-127 | 126-119 | 118-107 | 106-96 | 95-87 | 86-73 |
| Average polymerization | 1350-1250 | 1250-1150 | 1100-1000 | 950-850 | 950-850 | 750-650 | ||
| Number of impurity particle max | 30 | 30 | 30 | 30 | 30 | 30 | 40 | 40 |
| Volatiles content % max | 0.40 | 0.40 | 0.40 | 0.40 | 0.40 | 0.40 | 0.40 | 0.40 |
| Appearing density g/ml min | 0.42 | 0.42 | 0.42 | 0.42 | 0.42 | 0.45 | 0.45 | 0.45 |
| Residual after sieve 0.25mm mesh max | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 |
| 0.063mm min | 90 | 90 | 90 | 90 | 90 | 90 | 90 | 90 |
| Number of grain/400cm2 max | 40 | 40 | 40 | 40 | 40 | 40 | 40 | 40 |
| Plasticizer absorbency value of 100g resin | 25 | 25 | 25 | 22 | 19 | 16 | 14 | 14 |
| Whiteness % min | 74 | 74 | 74 | 74 | 74 | 74 | 70 | 70 |
| Residual chlorethylenecontent mg/kg max | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 |
| Ethylidene chloride mg/kg max | 150 | 150 | 150 | 150 | 150 | 150 | 150 | 150 |